Samsung Galaxy Tab 4 7.0 LTE (SM-T235) Firmware (Unbrick/Repair)

Un-bricking, updating and/or fixing software faults on your Samsung Galaxy Tab 4 7.0 LTE (SM-T235) can quickly be done utilizing this main firmware.

This is a 4 file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your smartphone and/or repair other software faults on the gadget.

This firmware repairs software problems like:–LRB-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during usage, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom-made recovery (e.g, TWRP)
  • Remove root and bring back default system files
  • Help upgrade/ upgrade Android variation to latest security spot
  • And simply any software associated faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your specific gadget model. This is required to prevent downloading the wrong file, causing your device to brick.

Firmware information/ Download

Model SM-T235
T235 XXU1ANJ6_SER1ANJ3_SKZ1ANJ3 Download

How to flash Samsung Galaxy Tab 4 7.0 LTE (SM-T235) through Odin

Note: Backup very important data (messages, contacts, app information, settings, etc) as these might be eliminated as soon as flashing achieves success.

Charge your phone to a minimum of 50% prior to you continue with the flashing instructions below. Read and follow all steps thoroughly, particularly if you are not very knowledgeable in flashing Samsung gadgets.

  • Download and install Samsung official USB driver on your computer system. ( Skip step if currently set up)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
  • Connect gadget to Computer by means of USB cable television and wait until you get a blue sign in Odin
  • Select/ include the 4 firmware files drawn out in action one.
    • For circumstances, BL is the bootloader file- click BL in Odin and choose that file. In the exact same way, click AP, CP, and CSC select the files appropriately. See below screenshot
Samsung Galaxy Tab 4 7.0 LTE (SM-T235) Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait couple of minutes for the flashing process to begin and complete
  • Once flashing is total, disconnect device and boot normally.

Leave a Reply