Samsung Galaxy S6 Edge Firmware (Unbrick/Repair)

Posted on

Un-bricking, updating and/or fixing software faults on your Samsung Galaxy S6 Edge can easily be done using this main firmware.

This is a 4 file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your mobile phone and/or fix other software faults on the device.

This firmware repairs software issues like:–LRB-

  • Un-brick bricked gadgets
  • Fix apps require closing
  • Device getting stuck throughout usage, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom-made recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to newest security patch
  • And simply any software related faults

Before downloading any firmware for your Samsung device, check and verify that the firmware is meant for your exact gadget model. This is essential to avoid downloading the wrong file, triggering your gadget to brick.

Firmware details/ Download

Model SM-G925 A
G925 AUCU3BOJ7_ATT3BOJ7_v5.1.1 Download

Model SM-G925 F
G925 FXXU1AOCV_OXE1AOD1_v5.0.2 Download

Model SM-G925 I
G925 IDVU2COGA_ODD2COGA_India_v5.1.1 Download

Model SM-G925 T
G925 TUVU2COF6_TMB2COF6_V5.1.1 Download
G925 TUVU1AOCG_TMB1AOCG_T-Mobile_USA_v5.0.2 Download

How to flash Samsung Galaxy S6 Edge by means of Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be eliminated when flashing is successful.

Charge your phone to at least 50% prior to you proceed with the flashing instructions below. Read and follow all actions carefully, particularly if you are not extremely skilled in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer system. ( Skip step if already set up)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
  • Connect device to Computer via USB cable television and wait up until you get a blue check in Odin
  • Select/ add the 4 firmware files drawn out in action one.
    • For circumstances, BL is the bootloader file- click BL in Odin and select that file. In the exact same method, click AP, CP, and CSC choose the files accordingly. See listed below screenshot
Samsung Galaxy S6 Edge Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing procedure to start and finish
  • Once flashing is total, detach gadget and boot normally.
Gravatar Image
I am Owner of (https://barecipes.xyz) Website. I Build this website for helping Peoples for Finding the Driver & Software they need to their Operating System.

Leave a Reply

Your email address will not be published. Required fields are marked *