Samsung Galaxy S5 Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy S5 can quickly be done using this main firmware.

This is a four file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your smartphone and/or fix other software faults on the gadget.

This firmware fixes software problems like:–LRB-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during usage, or lagging
  • Fix stuck on boot logo design
  • Fix boot loop
  • Remove custom-made healing (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ upgrade Android version to newest security patch
  • And simply any software associated faults

Before downloading any firmware for your Samsung gadget, check and verify that the firmware is suggested for your exact device design. This is needed to prevent downloading the incorrect file, causing your device to brick.

Firmware details/ Download

Model SM-G900 F
G900 FXXS1CPC8_SLK1CPB2_Sri_Lanka_v6.0.1 Download

Model SM-G900 H
G900 HXXU1CPG3_SER Download

How to flash Samsung Galaxy S5 through Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be eliminated when flashing achieves success.

Charge your phone to at least 50% prior to you continue with the flashing directions below. Read and follow all actions thoroughly, particularly if you are not very experienced in flashing Samsung gadgets.

  • Download and install Samsung official USB driver on your computer. ( Skip action if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
  • Connect gadget to Computer through USB cable and wait up until you get a blue sign in Odin
  • Select/ add the 4 firmware files drawn out in action one.
    • For circumstances, BL is the bootloader file- click BL in Odin and choose that file. In the exact same method, click AP, CP, and CSC select the files appropriately. See below screenshot
Samsung Galaxy S5 Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait couple of minutes for the flashing procedure to start and complete
  • Once flashing is total, disconnect device and boot normally.

Leave a Reply