Samsung Galaxy S10 Firmware (Unbrick/Repair)

By | May 4, 2021

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy S10 can easily be done using this official firmware.

This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

Model SM-G973F
G973FXXU3ASIG_G973FOXM3ASIE_XXV_9.0 Download / Download
G973FXXU2ASF3_G973FOXM2ASF3_XXV_9.0 Download / Download
G973FXXU1ASBA_G973FOXM1ASBA_XXV_9.0 Download / Download

Model SM-G973U / U1 / W
G973USQU2ASGC_G973UOYN2ASGC_TMB_9.0 Download / Download
G973USQU1ASBA_G973UOYN1ASBA_USC_9.0 Download / Download
G973U1UEU1ASBA_G973U1OYM1ASBA_XAA_9.0 Download / Download
G973WVLU1ASBA_G973WOYV1ASBA_XAC_9.0 Download / Download

Model SM-G9730
G9730ZCU1ASBA_G9730CHC1ASBA_CHC_9.0 Download / Download
G9730ZHU1ASBA_G9730TGY1ASBA_TGY_9.0 Download / Download

Model SM-G973N
G973NKSU1ASBA_G973NOKR1ASBA_KOO_9.0 Download / Download
G973NKSU1ASBA_G973NOKR1ASBA_KTC_9.0 Download / Download
G973NKSU1ASBA_G973NOKR1ASBA_LUC_9.0 Download / Download
G973NKSU1ASBA_G973NOKR1ASBA_SKC_9.0 Download / Download

Model SC-03L
SC03LOMU1ASD9_SC03LDCM1ASD9_DCM_9.0 Download / Download

How to flash Samsung Galaxy S10 via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Samsung Galaxy S10 Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.
Author: barecipes.xyz

I am Owner of (https://barecipes.xyz) Website. I Build this website for helping Peoples for Finding the Driver & Software they need to their Operating System.

Leave a Reply

Your email address will not be published. Required fields are marked *