Samsung Galaxy J4 (2018) Firmware (Unbrick/Repair)

By | April 21, 2021

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy J4 (2018) can easily be done using this official firmware.

This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

Download Samsung Galaxy J4 (2018) SM-J400F 5 files firmware

ModelSM-J400F
J400FXXU3BSDD_J400FOLM3BSDB_XXV_9.0Download | Download
J400FXXS3ASD5_J400FOLM3ASD1_XXV_8.0Download | Download
J400FPUU2ARGA_J400FSER2ARGA_SER_8.0Download | Download
J400FXXU1ARE5_J400FOLM1ARDL_XXV_8.0Download | Download
J400FXXU1ARE3_J400FOJM1ARDI_MID_8.0Download | Download

Download Samsung Galaxy J4 (2018) SM-J400M 5 files firmware

ModelSM-J400M
J400MUBU3BSDD_J400MOWO3BSDA_ZTO_9.0Download | Download
J400MUBS3ASD3_J400MOWO3ASD3_ZTO_8.0Download | Download
J400MUBU2ARG7_J400MOWO2ARF7_PEO_8.0Download | Download
J400MUBU1ARE8_J400MOWO1ARE9_ZTO_8.0Download | Download

Download Samsung Galaxy J4 (2018) SM-J400G 5 files firmware

ModelSM-J400G
J400GDXU3BSDB_J400GOLO3BSDB_BRI_9.0Download | Download
J400GDXS3ASD1_J400GOLO3ASD1_BRI_8.0Download | Download
J400GDXU2ARJ2_J400GOLO2ARJ2_BRI_8.0Download | Download
J400GDXU1ARE3_J400GOLO1ARE3_BRI_8.0Download | Download

How to flash Samsung Galaxy J4 (2018) via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Samsung Odin
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.
Author: barecipes.xyz

I am Owner of (https://barecipes.xyz) Website. I Build this website for helping Peoples for Finding the Driver & Software they need to their Operating System.

Leave a Reply

Your email address will not be published. Required fields are marked *