Samsung Galaxy Gear (SM-T700) Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or fixing software faults on your Samsung Galaxy Gear (SM-T700) can easily be done utilizing this official firmware.

This is a 4 file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your mobile phone and/or fix other software faults on the device.

This firmware repairs software issues like:–LRB-

  • Un-brick bricked gadgets
  • Fix apps require closing
  • Device getting stuck during usage, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom-made recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ upgrade Android version to latest security spot
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and verify that the firmware is suggested for your exact device design. This is required to avoid downloading the wrong file, causing your gadget to brick.

Firmware details/ Download

Model SM-T700
V700 XXUBNC1_OXABNC1_v4.2.2 Download

How to flash Samsung Galaxy Gear (SM-T700) by means of Odin

Note: Backup very important data (messages, contacts, app data, settings, etc) as these might be erased when flashing succeeds.

Charge your phone to a minimum of 50% before you continue with the flashing instructions listed below. Read and follow all steps thoroughly, especially if you are not really experienced in flashing Samsung gadgets.

  • Download and set up Samsung main USB driver on your computer. ( Skip action if currently installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
  • Connect gadget to Computer through USB cable television and wait till you get a blue check in Odin
  • Select/ include the four firmware files drawn out in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same method, click AP, CP, and CSC pick the files appropriately. See below screenshot
Samsung Galaxy Gear (SM-T700) Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait couple of minutes for the flashing process to begin and complete
  • Once flashing is total, detach gadget and boot usually.

Leave a Reply