Samsung Galaxy Ace Plus (GT-S7500) Firmware (Unbrick/Repair)

Posted on

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy Ace Plus (GT-S7500) can conveniently be done utilizing this main firmware.

This is a four file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your smartphone and/or fix various other software mistakes on the gadget.

This firmware solutions software problems like:–LRB-

  • Un-brick bricked gadgets
  • Fix apps force closing
  • Device obtaining stuck throughout use, or lagging
  • Fix stuck on boot logo design
  • Fix boot loop
  • Remove customized recuperation (e.g, TWRP)
  • Remove root as well as recover default system data
  • Help upgrade/ upgrade Android variation to newest safety and security spot
  • And just any software related mistakes

Before downloading and install any firmware for your Samsung device, check and also confirm that the firmware is suggested for your precise gadget model. This is essential to stay clear of downloading the wrong documents, creating your device to block.

Firmware information/ Download

Model GT-S7500
S7500 XXLF1_2.3.6 Download

Model GT-S7500 W
S7500 WXXLD5_O2ULD5_v2.3.6 Download

How to flash Samsung Galaxy Ace Plus (GT-S7500) via Odin

Note: Backup all important data (messages, contacts, application information, setups, etc) as these might be erased when blinking achieves success.

Charge your phone to a minimum of 50% prior to you proceed with the flashing instructions listed below. Read and also follow all steps very carefully, especially if you are not extremely seasoned in flashing Samsung tools.

  • Download as well as mount Samsung main USB driver on your computer. ( Skip step if already installed)
  • Download and extract (unzip) the firmware data
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press as well as hold Home Power Volume Down buttons)
  • Connect device to Computer using USB wire and wait until you get a blue check in Odin
  • Select/ include the 4 firmware files extracted in step one.
    • For circumstances, BL is the bootloader documents- click BL in Odin as well as select that file. Similarly, click AP, CP, as well as CSC select the data appropriately. See listed below screenshot
Samsung Galaxy Ace Plus (GT-S7500) Firmware (Unbrick/Repair) 1
  • Make certain re-partition is NOT ticked
  • Click the beginning button and wait couple of minutes for the blinking process to begin as well as complete
  • Once flashing is total, separate tool as well as boot usually.
Gravatar Image
I am Owner of (https://barecipes.xyz) Website. I Build this website for helping Peoples for Finding the Driver & Software they need to their Operating System.

Leave a Reply

Your email address will not be published. Required fields are marked *