Samsung Galaxy A3 2016 (SM-A310F) Firmware (Unbrick/Repair)

Un-bricking, updating and/or repairing software mistakes on your Samsung Galaxy A3 2016 (SM-A310 F) can easily be done utilizing this main firmware.

This is a 4 documents (AP, BL, CP as well as CSC) repair work firmware with which you can unbrick your smart device and/or repair various other software faults on the gadget.

This firmware fixes software problems like:–LRB-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device obtaining stuck throughout use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove customized recovery (e.g, TWRP)
  • Remove origin as well as bring back default system data
  • Help upgrade/ upgrade Android version to most current safety patch
  • And just any kind of software relevant mistakes

Before downloading any type of firmware for your Samsung tool, check as well as validate that the firmware is meant for your specific gadget version. This is needed to avoid downloading and install the incorrect documents, causing your tool to block.

Firmware information/ Download

Model SM-A310 F
A310 FXXU1APB7_OXY1APB7_v5.1.1 Download

How to blink Samsung Galaxy A3 2016 (SM-A310 F) via Odin

Note: Backup very important information (messages, contacts, app information, settings, etc) as these could be removed once blinking succeeds.

Charge your phone to at the very least 50% before you proceed with the blinking instructions below. Read as well as comply with all actions very carefully, specifically if you are not extremely experienced in blinking Samsung gadgets.

  • Download as well as install Samsung official USB driver on your computer. ( Skip action if currently set up)
  • Download as well as remove (unzip) the firmware data
  • Download Odin Tool
  • Extract the contents of Odin ZIP documents
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
  • Connect device to Computer through USB cable and also wait up until you get a blue sign in Odin
  • Select/ include the four firmware data drawn out symphonious one.
    • For circumstances, BL is the bootloader file- click BL in Odin and choose that data. Similarly, click AP, CP, as well as CSC pick the documents appropriately. See below screenshot
Samsung Galaxy A3 2016 (SM-A310F) Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the beginning button and wait few minutes for the blinking process to start and finish
  • Once blinking is complete, detach device and boot generally.

Leave a Reply