Samsung Galaxy A21s (SM-A217F) firmware (Unbrick/Repair)

Un-bricking, updating and/or repairing software faults on your Samsung Galaxy A21 s (SM-A217 F) can easily be done using this official firmware. This is a 4 file (AP, BL, CP as well as CSC) repair work firmware with which you can unbrick your smartphone and/or repair various other software faults on the gadget.

This firmware fixes software concerns like:–LRB-

  • Un-brick bricked gadgets
  • Fix apps require closing
  • Device obtaining stuck during usage, or lagging
  • Fix stuck on boot logo design
  • Fix boot loop
  • Remove customized recovery (e.g., TWRP)
  • Remove root and recover default system files
  • Help upgrade/ upgrade Android variation to latest safety patch
  • And just any type of software relevant faults

Before downloading any type of firmware for your Samsung tool, check and validate that the firmware is indicated for your precise gadget model. This is essential to prevent downloading and install the incorrect file, creating your gadget to block.

Download Samsung Galaxy A21 s (SM-A217 F) firmware

SM-A217 F Link
Download

How to blink Samsung Galaxy A21 s (SM-A217 F) through Odin

Note: Backup very important information (messages, calls, application data, setups, etc.) as these could be erased when blinking succeeds.

Charge your phone to at least 50% before you proceed with the blinking guidelines listed below. Read as well as adhere to all actions very carefully, specifically if you are not very experienced in blinking Samsung tools.

  • Download and also mount Samsung main USB driver on your computer system. ( Skip step if already installed)
  • Download and also remove (unzip) the firmware file
  • Download Odin Tool
  • Extract the components of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and also hold Home Power Volume Down buttons)
  • Connect gadget to Computer via USB cord and also wait until you obtain a blue sign in Odin
  • Select/ include the four firmware files extracted in step one.
    • For circumstances, BL is the bootloader data- click BL in Odin and choose that file. Similarly, click AP, CP, as well as CSC select the data appropriately. See below screenshot
Samsung Odin
  • Make sure re-partition is NOT ticked
  • Click the begin switch and wait few minutes for the flashing process to begin and also complete
  • Once flashing is total, disconnect tool as well as boot typically.

Leave a Reply