Nokia 4.2 (TA-1152) official firmware; how to flash

To recover your Nokia 4.2 (TA-1152) smart device to its default factory state, you need to flash its supply firmware (flash data) from a COMPUTER. This documents will eliminate root, virus infection, as well as un-brick/fix your tool if it’s stuck on boot logo. Likewise, if there’s a problem of lag when utilizing the device, a total flash needs to fix that.

Before blinking, you need to think about making a backup of your current firmware, and all various other vital data on your device. Flashing will completely eliminate your phone.

We suggestions that you must just blink your device if you actually know what you’re doing. You need to take this details seriously, to stay clear of messing up your gadget, or transforming it into a brick. It’s also important that you bill the device to at least 30%, so the procedure is not interrupted due to reduced battery.

If there’s a broken web link, do not think twice to report by means of the comments section or utilize the contact kind.

Build Nokia_4.2 _ TA-1152 _ HMDSW_Panther-117 I-0-00 WW-B01
Android variation 9.0 Pie
Size 1. 53 GB
Firmware Download

Flashing Instructions

To blink this firmware using Fastboot, your phone bootloader has to be unlocked. If you’ve already done this, continue.

You can by hand blink this firmware to your phone via Fastboot, or flash via QPST. Click on this link to discover just how to blink making use of QPST or continue reading to comply with Fastboot technique.

  • Once you have downloaded the firmware, essence to a vacant folder
  • In the folder, open brand-new command home window (SHIFT Right-click, pick ‘open command window right here’)
    • prior to this action, you need to have already set up ADB/Fastboot system-wide. If you have a particular folder having your Fastboot files, simply remove the firmware in that folder.
  • After opening up command punctual, run the complying with commands together
 fastboot flash: raw boot boot.img
fastboot flash custom custom.img
fastboot flash dtbo dtbo.img
fastboot flash mdtp mdtp.img
fastboot flash persist persist.img
fastboot flash photo picture.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash supplier vendor.img
fastboot-- disable-verity-- disable-verification flash vbmeta vbmeta.img

Once that is finished, run

 fastboot reboot

Leave a Reply