Bobarry K10SE official firmware flash file

This Bobarry K10SE (and k107-mb-v6.0 board ID) factory firmware (stock ROM) can help you easily un-brick or restore your device to its default or factory state. If you previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing modified system files to replace with factory software.

If you have you have important data on the phone (like contacts, messages, app data, etc.), please back them up because you could loose data after flashing.

Charge the phone to at least 50% so that the flashing process will not be interrupted by low battery. Interrupting the firmware installation means bricking your phone.

Download the firmware file from the link below and follow the recommended flashing instructions immediately after the download options. Please report any broken links discovered.

Build Firmware Board ID Size
K10SE 4G 64G V3 V4 Download 377 MB
vKB004C-GMS-D1-16G_32G Download k107-mb-v6.0 (MT6580) 481 MB

!Note: Backup current firmware before flashing.

How to flash

  1. Install WiseLinkTool_v3.1.0.29.exe (Download) firmware on the PC
  2. In the program, select the offline login item
  3. Click on the Open RegCode file button and select the file with the “.key” permission from the archive with program for flashing.
  4. After that, click “OK
    If you’re unable to login to BeTools with the selected key file, click here to learn how to fix.
  5. In the Project list column, select TD786 unless otherwise specified.
  6. Unzip the firmware
  7. In the program, click the button as shown in the figure.
  8. Select a file with .SCA extension from the firmware folder
  9. Click the Download button and connect the turned off tablet to the PC.
  10. The firmware process is displayed on the bottom line. Do not disconnect tablet from PC to complete the firmware process

Ps. If the firmware process does not start, then you need to install the drivers. They can be found in the archive containing the firmware files.

If you have any questions or other contribution please post in comments section for assistance.

Leave a Reply