Alldocube M5X Pro (T1006XP) stock firmware (flash file)

Alldocube M5X Pro (T1006 XP) official stock firmware will certainly assist you blink as well as recover your phone to its default manufacturing facility state. It will certainly eliminate root, virus, un-brick, and fix your tool if it’s stuck on boot logo. If your phone lags, after flashing it must be better.

Additionally, you should consider making a backup of your current firmware, and all other vital information on your phone. Flashing will completely eliminate your phone. You ought to only flash your tool if you in fact know what you’re doing. To avoid messing up your gadget, or transforming it right into a block.

It’s also important that your gadget is charged up to at least 30% so the procedure is not cut off due to closure.

If there’s a damaged web link, do not think twice to report via the comments area or use the contact kind.

Firmware download web link

Version Firmware Size
M5XP( T1006 XP)- Android8.0-ALLDOCUBE-200505 Download 1.01 GB

Flashing instructions

You need a tool like SP Flashtool, Miracle Box, AfterSales SWD Tool, etc., to blink this firmware. Get a working USB cable, then adhere to the instructions listed below-

  • Unpack downloaded and install firmware to an empty folder
  • Make sure you’ve installed the required drivers on your PC.
  • Launch flashtool as well as lots the firmware. You could need to wait a few secs for it to procedure entirely
  • Now power off your tool as well as go here to read complete blinking guidelines if utilizing SP Flashtool.

If you need any help on this tool or flashing directions, or you’ve obtained other payment- do not wait to post in the remarks section below. We do our best to respond as well as answer your questions.

Leave a Reply